Packard Bell 5800, ST8000 manual Rear Panel Components, Interface Card

Rear Panel Components

The DEU rear panel comprises four major components: I/O Interface cards, power cord connector module, fuse, and access doors to power supplies and fans.

	VHD SCSI
	Connector
	I/O Interface Card
	Power Supply #3
	with PSU Cover Plate
	PSU “DC Good” LED
Fuse
AC Power Cord
Connector	Rear Door Fastener
AC Power Cord
Retainer	Rear Door Panel
	I/O Interface Card
VHD SCSI	Card Handle
Connector

I/O Interface Card

The I/O Interface card makes up the connection from the subsystem’s bus to the RAID controller. Located on the I/O Interface card are two 68-pin very high density (VHD) SCSI connectors. They provide the interface connection from the subsystem bus to the RAID controller or host adapter. The connectors are labeled Channel 0 and Channel 1.

PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off top and right edge. Left side of page extends to 9.25 inches.