Internal Temp

This screen displays the current internal cabinet temperature (highest of the two sensors). To change the temperature threshold of the monitoring system, see Heat Threshold described later in this guide.

POWER STATUS CONFIGURATION INFO

POST RESULTS

INTERNAL TEMP

CABINET INTERNAL

TEMPERATURE 75 F / 24 C

MENU ENTER ESCAPE

MENU ENTER ESCAPE

Options Menu

The Options Menu provides access to the following menus:

SCSI ID Menu

Heat Threshold

SAFTE Chain ID

Change Passcode

Unlock Options

S CSI ID Menu

From the SCSI ID Menu you can set SCSI IDs for drives attached to each of the SCSI channels (lower slot and upper slot), set the DEU (SAF-TE) processor ID, set the SCSI ID of the Ultra S2S RAID Controller (RAID Module). SCSI IDs 0 - 15 are available.

PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off top and right edge. Left side of page extends to 9.25 inches.

Page 49
Image 49
Packard Bell 5800, ST8000 manual Options Menu, Internal Temp, CSI ID Menu