PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
LED Descriptions

Use the following LED description matrix to determine the status of

the DEU LEDs when the SAF-TE card is in stalled and the RAID

controller is powered on.

SAF-TE LED Matrix

AT POWER UP Steady Green Steady Green
DRIVE READY
NOT ASSIGNED Blinking Green Steady Green
DRIVE READY
ASSIGNED Steady Green Steady Green
HOT SPARE READY
ASSIGNED Blinking Green Steady Green
DRIVE ERROR
NOT ASSIGNED Blinking Green Steady Amber
DRIVE ERROR
ASSIGNED Blinking Amber Steady Amber
Blinking GreenUNASSIGNED DRIVE
Steady GreenASSIGNED TO ARRAY
ARRAY IS FAULT-TOLERANT
ARRAY IS IN REBUILD MODE
ARRAY HAS A FAILED DRIVE
HOT SPARE
ALL EMPTY BAYS
FAILED DRIVE
REBUILD MODE
Steady Green
Steady Amber
Steady Amber
FIRMWARE CHECKSUM ERROR Alternating Amber and Green
Blinking Green
Off
Blinking Amber
Steady Amber (all drives)
ARRAY CRITICAL
REMAINING GOOD DRIVES Steady Amber Steady Amber
HOT SPARE
REBUILD MODE Steady Amber Steady Amber
DRIVE MANUALLY
DISABLED Blinking Amber Steady Amber
STATUS LEDs
STATUS LEDs
CHANNEL MODE LEDs
CHANNEL MODE LEDs