
Differential SCSI | Chl #1 |
Host Adapter | Chl #12 |
Host Computer #1
meters)(25Differential CableDataSCSI | meters)(25Differential CableDataSCSI | TOP Master |
| TOP Slave #1 | ModuleBusSingle- |
ModuleBusSingle- |
| Chl #0 | |||
| Chl #0 | Chl #1 |
| Chl #1 | |
|
| I/O Interface Card |
|
| |
|
| Converter Card |
|
|
|
|
|
|
| ||
|
| I/O Interface Card |
|
| |
| Chl #0 | Chl #1 | Extender Card | Chl #0 | Chl #1 |
|
| ||||
|
| 1 meter Ultra Wide SCSI Jumper |
| ||
|
| 1 meter Ultra Wide SCSI Jumper |
|
| |
|
|
| Available Drive |
| |
|
|
| Unavailable Drive |
|
7Connect one end of a 25 meter data cable to the Channel #1 connector on the differential host adapter.
8Connect the other end of the data cable to the Channel 1 connector on the upper or right side two- channel Differential Converter Option card installed in the “master” cabinet.
9Connect one end of a 1 meter jumper cable to the Channel 0 connector on the lower or left side I/O Interface card in the “master” cabinet.
10Connect the other end of the 1 meter jumper cable to the Channel 0 connector on the lower or left side
11Connect one end of a second 25 meter data cable to the Channel #2 connector on the differential host adapter.
12Connect the other end of that data cable to the Channel 0 connector on the upper or right side 2- channel Differential Converter Option card in the “master” cabinet.
13Connect one end of a second 1 meter jumper cable to the Channel 1 connector on the lower or left side I/O Interface card in the “master” cabinet.
14Connect the other end of the second 1 meter jumper cable to the Channel 1 connector on the lower or left side
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off top and right edge. Left side of page extends to 9.25 inches.