Packard Bell 5800, ST8000 manual

Differential Converter

Option Card

Master Cabinet

I/O Interface Card

4Install a single-channel Differential Converter Option card into the upper or right side card slot in the master cabinet and tighten the thumb screws.

5Loosen the two thumb screws and remove the I/O Interface card installed in the upper or right side card slot of the slave #1 cabinet.

6Install a single-channel Ultra Extender Option card into the upper or right side card slot in the slave #1 cabinet and tighten the thumb screws.

PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off top and right edge. Left side of page extends to 9.25 inches.