Quick Install
he following procedures outline the steps necessary to setup your DEU subsystems. These guidelines are generally for those individuals who don’t like to read manuals.
Install the Disk Drives — Open the front door of each cabinet and insert the disk drives. Be sure each drive seats properly and the drive latches are secured.
Install the Option Cards — Install the correct Option cards in the correct slot for your configuration.
Connect the Cables — Connect the data and jumper cables. Refer to DEU Subsystems Installations later in this section for the supported configurations under
TDifferential SCSI.
Configure your system — Run your system configuration program to setup the drives, and/or your RAID software configuration.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off top and right edge. Left side of page extends to 9.25 inches.
