5Grasp the handle of the subject power supply and pull the supply out of the DEU cabinet.
6Remove the new power supply from the shipping carton and inspect the shipment. Save the packaging material.
7Slide the new power supply into the cabinet until it reaches its locked position. Orient the supply in the same manner as the removed power supply. (Air slots in the PSU case face toward the center of the cabinet.)
The new power supply’s LED should illuminate.
8Close the rear door panel. The door has a latch mechanism to hold the door in the open position. Squeeze the latch to release the door allowing it to be closed.
If you are replacing the #3 power supply,
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off top and right edge. Left side of page extends to 9.25 inches.
