5Remove the failed fan by sliding it out from the door assembly.
6Remove the new cooling fan from the shipping carton and inspect the shipment. Save the packaging material.
7With the fan guard facing toward the inside of the cabinet, slide the new fan into its housing.
8Reconnect the fan’s power cable connector. The connector is keyed and will install only one direction.
9Close the rear door panel. The door has a latch mechanism to hold the door in the open position. Squeeze the latch to release the door allowing it to be closed.
10Secure the door with the access panel screw.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off top and right edge. Left side of page extends to 9.25 inches.
