3Identify which subsystem will be the master cabinet. Loosen the two thumb screws and remove the I/O Interface card installed in the upper or right sidecard slot of the master cabinet.
Differential Converter |
Option Card |
Master Cabinet
I/O Interface Card
4Install a Differential Converter Feature card into the upper or right side card slot in the master cabinet and tighten the thumb screws.
5Loosen the two thumb screws and remove the I/O Interface card in the lower or left side card slot in the slave #1 cabinet.
I/O Interface Card
Master Cabinet
Ultra Extender
Option Card
6Install a
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off top and right edge. Left side of page extends to 9.25 inches.
