Packard Bell ST8000, 5800 manual J15 FAN and J17 OEM FAN

J15 (FAN) and J17 (OEM FAN)

Caution: Jumper configuration to be performed by qualified service personnel only.

There are two separate fan connectors that are located at J15 and J17. Fan connector J15 is used when a SAF- TE card is present in the DEU. When the fans are plugged into J15, the SAF-TE card controls and monitors fan speed.

Fan connector J17 is used in OEM applications when there is no SAF-TE card installed. Fan connector J17 supplies each fan with +12 volts for full speed operation.

J15

4

4

FAN

1

1 OEM FAN

J17

PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off top and right edge. Left side of page extends to 9.25 inches.