Installation Precautions
Please observe the following cautions and notes prior to
Tand during installation:
Printed circuit board components are sensitive to electrostatic discharge. To prevent operating failure or damage, observe the following: Establish a ground for yourself by using the wrist grounding strap, or by touching the metal chassis prior to handling or installing the printed circuit board components.
Exercise care when handling any electrical component.
Do not overtighten the thumb screws on the feature cards and cable connectors. Secure them to finger
Ttight only.
Interface and feature cards are keyed and will install only one way.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off top and right edge. Left side of page extends to 9.25 inches.
