1.Choose the SAFTE CHAIN ID selection and press the <Enter> button.
2.Use the up and down arrow buttons to choose between the options: none, master, slave 1, and slave 2 and press the <Enter> button.
Note: Choose NONE when the cabinet is used in a
3.You will be prompted to cycle the power on the DEU for the changes to take effect.
HEAT THRESHOLD
SAFTE CHAIN ID
CHANGE PASSCODE
UNLOCK OPTIONS
MENU ENTER ESCAPE 
NONE
MASTER
SLAVE 1
SLAVE 2
MENU ENTER ESCAPE
Change Passcode
This option allows the administrator to create or change a passcode that will protect access to all the items under the selections SCSI ID Menu, Heat Threshold, and Change Passcode.
1Use the arrow buttons to change the code value
2Press the enter button after you have made your selections.
3You will be prompted to press the escape button after the passcode is changed for the change to take affect. The default code is “0000.”
Note: The lock will not take effect until you have returned to the main screen “Status OK.”
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off top and right edge. Left side of page extends to 9.25 inches.
