Packard Bell 5800, ST8000 manual System Status Icon, Main Menu

If you install five (5) or more drives with only two (2) power supplies installed, an alarm will sound, the Power Supply LED will illuminate steady amber, and the OCP display will indicate “Non-Redundant Power.” Install a third power supply and the display will clear followed by the Power Supply LED will return to steady green.

System Status Icon

Afeature of the DEU OCP is the “at-a-glance” animated icon that appears indicating subsystem status. The icon that appears approximately 30 seconds after a static display in the location where the cursor would normally be located.

The animated icon will have a “happy” face and looks “left and right”, if all the systems are operating normally. If an abnormality occurs within the subsystem, the icon will change to a “sad” face requesting your attention.

Happy Icon (system nominal)

Sad Icon (system nominal)

Main Menu

From the Main Menu you can select from the following options:

■Turn off the audible alarm

■Choose the hardware menu

■Choose the options menu

To access the Main menu, press the <Menu> button. Use the up and down arrow buttons to make your selection and press the <Enter> button.

PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off top and right edge. Left side of page extends to 9.25 inches.