Packard Bell ST8000, 5800 manual Ultra Extender Option Card Master Cabinet Interface Card

3Identify the subsystem which will be the master cabinet. Loosen the two thumb screws and remove the I/O Interface card installed in the upper or right side card slot of the master cabinet.

Ultra Extender

Option Card

Master Cabinet

I/O Interface Card

4Install a two-channel Ultra Extender Feature card into the upper or right side card slot where the I/O Interface card was removed and tighten the thumb screws.

5On the subsystem that will be the slave #1 cabinet, remove the I/O Interface card by loosening the two thumb screws and removing the card located in the lower or left side card slot.

PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off top and right edge. Left side of page extends to 9.25 inches.