Rack-Mount Subsystem Assembly
Install the DEU into any standard IAE 19" rack cabinet.
Caution: Ensure that the location of the DEU does not create an unstable condition when installed in the rack cabinet enclosure.
Note: Mount the subsystem into the rack enclosure before installing the disk drives. This will reduce the weight required to support during installation.
1Select an appropriate location in your rack cabinet for the DEU. If you are installing multiple systems, review the cabling configuration section later in this chapter for your cable scheme to determine the optimum location.
Screw
Washer
Screw 
Support Bracket
Caged Nut
Caged Nut
Caged Nut
Front Bezel
Screw
Plastic
Washer
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off top and right edge. Left side of page extends to 9.25 inches.
