Packard Bell 5800, ST8000 manual

Hot Swap Power Supplies — Dual hot swappable power supplies expandable to three, all with current sharing circuitry. Power supply system provides monitoring and sequencing.

Cooling — Dual high capacity cooling fans.

Notifications — LEDs and audible alarms provide failure notifications.

Inside door panel Fault LEDs provide drive failure identification.

Front Panel — A password protected Operator Control Panel (OCP) for administration control and monitoring functions, including control of SCSI ID settings. Animated OCP icons for an “at-a-glance”

Tdetermination of system status.

Option Cards — Full support for Option cards available in Differential Converter and Ultra Extender versions providing data transfer rates up to 40 MBs per second. Both support either single or dual bus Differential SCSI and Ultra SCSI applications.

Termination — Option cards configured for automatic SCSI-bus termination.

Remote/Delay Start — A backplane jumper provides for subsystem control of disk drive spin up delay when the adapter does not supply this feature.

SCSI-to-SCSI Support — Support for an Ultra S2S RAID Controller providing on-board Ultra SCSI-to- Ultra SCSI RAID processing.

Locking Door — A key-locking front door that deters unauthorized access to the drives, controllers, and power switch.

SAF-TE — Complete support of SAF-TE v1.0 standards (SCSI Accessed Fault Tolerant Enclosure) protocol.

Cluster-Ready — Cluster-ready subsystem (refer

Tto the Ultra S2S User’s Guide).

OS Support — Supports the following OS platforms: Novell NetWare, Microsoft® Windows NT™, and SCO UNIX compatible.

PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off top and right edge. Left side of page extends to 9.25 inches.