Polycom 6.1 Selecting In Band & Configuring the PE-Controller, Configuring The PE-Controller

Models: 6.1

1 118
Download 118 pages 48.03 Kb
Page 43
Image 43
4.12.4 Selecting In Band & Configuring the PE-Controller

during delivery to enhance scalability and to leverage a greater range of video and audio sources, including phone bridges and closed circuit television. The primary benefits of using out-of-band synchronization include:

Distribution of non-streaming content can be staggered so that the web-server is not delivering content (e.g. PowerPoint slides) to the entire audience at the exact same moment.

No additional software needs to be installed on an encoder

Out-of-band distribution enables a content author to deliver synchronized web content, such as PowerPoint slides, in tandem with non-streaming audio and video, such as closed circuit television.

4.12.4 Selecting In Band & Configuring the PE-Controller

If you are using out-of-band distribution only, please proceed to Section 4.12.7.

Using In-Band distribution requires the PE-Controller, which is a separate install included in Accordent PresenterPRO. The PE-Controller is an application that resides on the encoder and enables Accordent PresenterPRO to communicate with, launch and control the Microsoft and Real encoders. The encoder (and the PE-controller) can be located on a remote system or on the same system that Accordent PresenterPRO is residing.

Prior to completing the in-band fields in the Presentation Wizard, it is first necessary to configure the PE-Controller.

Configuring The PE-Controller

After installing the PE-Controller on the encoding system, launch the PE- Controller. The Accordent PresenterPRO Encoder Controller will appear (See Figure 4-77).

Fig. 4-77

The PE-Controller contains four screens that enable you to configure and manage encoding “jobs,” as follows:

39

Page 43
Image 43
Polycom 6.1 user manual Selecting In Band & Configuring the PE-Controller, Configuring The PE-Controller