Q-Logic 8200 SERIES manual Telnet Screen Initiated from the SANbox SSP Management GUI

3 – SANbox SSP Management GUI Reference Navigating the SANbox SSP Management GUI

Q

3.2.3

Telnet

The Telnet screen enables you to initiate a telnet session from the SANbox SSP Management GUI.

To begin a telnet session from the SANbox SSP Management GUI:

1.Click Telnet in the left-most pane.

2.Enter the correct administrative login and password. The following Telnet screen displays (see Figure 3-9):

Figure 3-9. Telnet Screen Initiated from the SANbox SSP Management GUI

The options in the lower window are:

Reconnect Telnet: Re-establishes a telnet session.

Disconnect Telnet: Disconnects a telnet session.

3-12 SN0054628-00 A