Q-Logic 8200 SERIES manual Introduction Regulatory and Safety Notices

Q

1 – Introduction Regulatory and Safety Notices

EN 60825-1:1994+A11

EMC: FCC Rules Part 15, Subpart B,2001.Class A (US) ICES-003:1997. Class A

ANSI C63.4:2000

EN55022 (1998), Performance Criteria A EN50081-1 (1992)

EN50082-1 (1997)

EN55024 (1998)

EN61000-3-2 (1995) A14:2000, Performance Criteria A EN61000-3-3 (1995), Performance Criteria B IEC61000-4-2 (1995) A1:1998, Performance Criteria B IEC61000-4-3 (1995) A1:1998, Performance Criteria B IEC 61000-4-4 (1995), Performance Criteria B IEC61000-4-5 (1995), Performance Criteria B IEC61000-4-6 (1996), Performance Criteria A

IEC61000-4-11 (1994), Performance Criteria B and C following the provisions of the Low Voltage Directive 72/23/EEC and EMC Directive 89/336/EEC and is Marked in accordance with the CE Marking Directive 93/68/EEC.

Any device that uses electricity must be handled carefully; follow these guidelines to ensure general safety:

■Keep SANbox SSP area clear and dust-free during and after testing.

■Place SANbox SSP in a secure and stable area.

Use the appropriate AC power for the system. The system components operate on input voltages and frequencies within the ranges of 100 to 240 VRMS and 50/60 Hz without the need for operator adjustments.

WARNING!! SANbox SSP may have more than one power supply connection for standard operation. All power supply connections need to be removed to fully de-energize the unit.

SN0054628-00 A 1-5