Q-Logic 8200 SERIES Show Fans Command, Show Group Command, Show Groups Command, Show ID Command

Q

B – Command Reference Commands

Show Fans Command

Displays the status, either OK or Error, and the RPM for all 10 fans in the SANbox SSP.

Syntax show fans

Notes If the fan is a power supply fan (Fan 1 and Fan 3), the RPM is not available. The RPM displays as 0 if the fan is not operational; as 1 if the fan is operational.

See Also "Show Fan Command" on page B-22

Show Group Command

Returns the list of user names that belong to the specified group name. The groups defined for SANbox SSP are Administrator and Monitor.

Syntax show group [group name]

Keywords show group [group name]

Name of the group to which the user belongs: Administrator or Monitor.

Show Groups Command

Returns a list of the users assigned to each group that is defined for this SANbox SSP. The groups defined for SANbox SSP are Administrator and Monitor.

Syntax show groups

See Also "Show Users Command" on page B-27

Show ID Command

Returns the user account that was authenticated for the current telnet session.

Syntax show id

Show Port Command

Returns diagnostic and status information for the specified port, 1-8 for

SANbox 8200-08 SSP/SANbox 8202-08 SSP or 1-16 for SANbox 8202-16 SSP. See the sample output in the Examples section, below, for more information.

Syntax	show port
	[port number]
	*

SN0054628-00 A B-23