Q-Logic 8200 SERIES manual

B – Command Reference Accessing the CLI

Q

The following menu options display (see Figure B-3):

Figure B-3. Telnet Console Menu Options

3.Enter commands into the telnet window to begin managing the SANbox SSP with the CLI commands.

B.2.1

Users and Groups

The SANbox SSP provides two built-in users and two built-in groups: kadmin is a member of the Administrator group, and kmonitor is a member of the Monitor group.

The default password for both accounts is kahuna. See "Modify User Command" (page B-16)for information about changing the password.

Users in the Monitor group are limited to commands that only view system configuration and status; Monitor users cannot change the system configuration. See the show commands, such as "Show User Command" (page B-27)and "Show Port Command" (page B-23), and so on, for more information.

Users in the Administrator group can create and delete users, and can also modify users, eths, and ports. See "Create User Command" (page B-8), "Delete User Command" (page B-8), "Modify User Command" (page B-16), "Modify Eth Command" (page B-13), "Modify Port Command" (page B-14), and "Modify Ports Command" (page B-15)for more information.

B-6 SN0054628-00 A