Q-Logic 8200 SERIES manual Checking Package Contents

3 – Getting Started with SANbox SSP Checking Package Contents

Q

Table 3-1. Roadmap of Setup Tasks (Continued)

	For This Setup Step:	See:
5.	In Section 4 SANbox SSP	■ "SAN Zoning" on page 5-3
	Management GUI Reference get	■ "Configuring Storage" on page 5-6.
	tips about zoning your SAN and	■ "To create storage pools:" on page 5-8.
	configuring storage, and use the	■ "To create a user defined host (UDH) and set the
	SVM GUI to manage your	SCSI personality:" on page 5-9.
	configuration.
6.	Review the troubleshooting	■ Section 7 Troubleshooting
	information as needed.

3.2

Checking Package Contents

CAUTION! Before shipping SANbox SSP to another site, remove the power supplies. SANbox SSP must not be shipped with the power supplies installed.

Ensure that all the components of the SANbox SSP arrived in the package. Save the shipping container, foam inserts, and anti-static bags; returning SANbox SSP without this packaging may void its warranty. Check the contents of the package to make sure that you received the following items and components:

■1 SANbox 8200-08 SSP, SANbox 8202-08 SSP, or SANbox 8202-16 SSP

■1 SANbox SSP CD-ROM:

❑SANbox 8200 Series Storage Services Platform Quick Start Guide for StoreAge SVM

❑SANbox SSP Release Notes

❑Installation/Upgrade software including OS and application

❑End User License Agreement

❑Release Notes

■1 RS-232 serial null modem cable

■2 SANbox SSP power supplies (SANbox 8202-08 SSP and SANbox 8202-16 SSP) or

1 SANbox SSP power supply (SANbox 8200-08 SSP)

■2 U.S. power supply cords (SANbox 8202-08 SSP and SANbox 8202-16 SSP) or 1 U.S. power supply cord (SANbox 8200-08 SSP)

■Rack mount kit, if ordered

3-2 SN0054628-00 A