Q-Logic 8200 SERIES manual Help Commands, Modify Date Command, Modify Eth Command

Q

B – Command Reference Commands

Help Commands

Provides a list of the first-level commands available in this command line interface.

Syntax help commands

See Also "Help Command" on page B-12

Modify Date Command

Sets the system date and time.

Syntax modify date [MM/DD/YYYY hh:mm:ss]

Keywords modify date [MM/DD/YYYY hh:mm:ss]

MM/DD/YYYY is the month, day, and year for the system time (year must be

4-digits long). hh:mm:ss is the hours, minutes, and seconds for the system time.

Notes Once the time zone is set, the system automatically switches between Standard Time and Daylight Saving Time.

See Also "Modify Timezone Command" on page B-16

Modify Eth Command

Configures the Ethernet properties—ip address, gateway, and subnet—for the specified Ethernet connection.

Syntax modify eth [ethernet name]

ip [ip addr]

gateway [gateway router] netmask [subnet mask]

Keywords At least one of the optional keywords is required:

modify eth [ethernet name]

Ethernet connection that you are modifying: MGMT, HA1, or HA2.

ip [ip addr]

IP address of the specified Ethernet.

gateway [gateway router]

Router for the specified Ethernet.

netmask [subnet mask]

Subnet mask for the specified Ethernet.

SN0054628-00 A B-13