Q-Logic 8200 SERIES manual Show Community Command, Show Date Command, Show Debug Command

Q

B – Command Reference Commands

serial_num

Indicates the serial number for this SANbox SSP.

Examples show chassis part_num

show chassis MAC_base_address orig_mfg_date show chassis orig_mfg_date serial_num

Show Community Command

Returns the name of the community string and whether the string is read-only or read-write. The community string for SANbox SSP is public.

Syntax show community

Notes The SNMP Community string is similar to a user id or password that allows access to a router's or other device's statistics.

See Also "Set Community Command" on page B-18

Show Date Command

Returns the current date, time, and the time zone.

Syntax show date

Show Debug Command

Returns information that may be helpful to QLogic support engineers in debugging a problem.

Notes	As this command returns a large amount of information to the screen, turn on
	logging in your terminal program so that you can capture all the information in a
	file to send to QLogic.
Syntax	show debug
	[dump]
	[fcptstate]
	[fcsexch]
	[fcsluns]
	.
	.
	.
	[wwpn]

Keywords At least one of the following keywords is required:

SN0054628-00 A B-19