Siemens G120 manual Automation and Drives SCE

Automation and Drives - SCE

12.After you have accepted the network settings, a bar appears to the right of the CPU315F-2 PN/DP, the ’PROFINET IO System’, where you can arrange PROFINET IO devices. This is done by clicking on the desired module (here, the ’SINAMICS G120’ with ’SINAMICS G120 CU240S PN’) and dragging it from the hardware catalog in the path ’PROFINET IO’ to the ’PROFINET IO System’. (→ PROFINET IO → Drives → SINAMICS → SINAMICS G120 → SINAMICS G120 CU240S PN).

When entering the SINAMICS G120 CU240S PN, a window appears where you assign an ’IP Address’ to the SINAMICS G120, specify the ’Subnet screen form’ and select the ’Ethernet’ that is already generated. Optional: for general communication, a ’Router Address’ can be selected. Confirm your inputs with ’OK’ (→ IP Adresse: 192.168.0.2 → Subnetzmaske: 255.255.255.0 → Ethernet(1) → Keinen Router verwenden (don’t use a router) → OK)

	Preface	Notes	Startup with PROFIBUS	Startup with PROFINET	Program Example
T I A Training Document			Page 113 of 147		Module
			H01
Issued: 02/2008			Frequency Converter SINAMICS G120 on PROFIBUS DP and PROFINET