Automation and Drives - SCE
31.After the hardware configuration is created, the ’SIMATIC 300 Station’ is located in the SIMATIC Manager. The ’SINAMICS G120’ still has to be set up. (→ SIMATIC Manager → Einfügen → Programm → SINAMICS)
32.Now select the following: ’Device type’, ’Device version’, ’Address type’ and ’Bus address’ and accept with ’OK’. (→ SINAMICS G120 → 2.1x → PROFIBUS/USS/PPI → 5 → OK)
|
|
|
|
|
|
|
| Preface | Notes | Startup with PROFIBUS |
| Startup with PROFINET | Program Example |
|
|
|
|
|
|
|
T I A Training Document |
| Page 92 of 147 |
| Module | ||
|
|
| H01 |
|
| |
Issued: 02/2008 |
| Frequency Converter SINAMICS G120 on PROFIBUS DP and PROFINET | ||||
