Automation and Drives - SCE
T I A Training Document Page 31 of 147 Module
H01
Issued: 02/2008 Frequency Converter SINAMICS G120 on PROFIBUS DP and PROFINET
Preface Notes Startup with PROFIBUS Startup with PROFINET Program Example
Repairs
Warning
Repairs on equipment may only be carried out by Siemens Service, by repair centers
authorized by Siemens or by authorized personnel who are thoroughly acquainted with all
the warnings and operating procedures contained in this manual.
Any defective parts or components must be replaced using parts contained in the relevant
spare parts list.
Disconnect the power supply before opening the equipment for access.
Dismantling and Disposal
Caution
The packaging of the inverter is re-usable. Retain the packaging for future use.
Easy-to-release screw and snap connectors allow you to break the unit down into its
component parts. You can recycle these component parts, dispose of them in accordance
with local requirements or return them to the manufacturer.
Note
For the following operational steps and task definitions, it is assumed that a preassembled converter
unit with asynchronous motor is used.
For electrical installation, please note the safety regulations and warnings provided by the
manufacturers.
Notes and guidelines regarding the assembly and the electrical installation are provided in the
manuals of the SINAMICS G120.