Automation and Drives - SCE
T I A Training Document Page 118 of 147 Module
H01
Issued: 02/2008 Frequency Converter SINAMICS G120 on PROFIBUS DP and PROFINET
Preface Notes Startup with PROFIBUS Startup with PROFINET Program Example
21. Now, the frequency converter has to be selected in order to ’Assign name’. (→ sinamicsxg120
→ Name zuweisen)
The new device name is displayed in the area ’Existing devices’. Then, ’Close’ the dialog. (→
Schließen)
Note: If several IO devices are on the network, the device can be identified by means of the
imprinted MAC address.