Automation and Drives - SCE
26.Finally, the data entered for the drive is displayed, and the configuration can be accepted with ’Complete’. (→ Fertig stellen)
27.Dialog boxes for setting additional parameters can be selected to the left of the project tree with a double click (→ for example, Motor temperature)
Note: If you place the mouse pointer over the parameter fields, you get in the "Tooltip“ the respective parameter number with the most important information.
| Preface | Notes | Startup with PROFIBUS | Startup with PROFINET | Program Example |
|
|
|
|
|
|
T I A Training Document |
| Page 65 of 147 |
| Module | |
|
|
| H01 |
|
|
Issued: 02/2008 |
| Frequency Converter SINAMICS G120 on PROFIBUS DP and PROFINET | |||
