Automation and Drives - SCE
22.By clicking on '
’, the configuration table can now be loaded to the PLC. The CPU’s operating mode switch should be on Run! (→ 
)
Note: Make sure your programmer is connected to the CPU via the Ethernet!
|
|
|
|
|
|
| Preface | Notes | Startup with PROFIBUS | Startup with PROFINET | Program Example |
|
|
|
|
|
|
T I A Training Document |
| Page 119 of 147 |
| Module | |
|
|
| H01 |
|
|
Issued: 02/2008 |
| Frequency Converter SINAMICS G120 on PROFIBUS DP and PROFINET | |||
