Siemens G120 manual Profibus Interface, Profinet Interface

Automation and Drives - SCE

3.4.6PROFIBUS Interface

The Control Unit CU240S DP is equipped with a 9-pole Sub-D socket connector for connecting the converter to a PROFIBUS DP network. The socket contact is short circuit proof and insulated.

Contact assignment of the 9-pol Sub D-socket connector

Note:

Details for connecting to PROFIBUS are provided in Appendix IV of the training document, or the operating instructions for the CU240S DP.

3.4.7PROFINET Interface

The CU240S PN is equipped with two Ethernet connections.

This Ethernet switch for two connections is designed in the form of RJ45 plugs. Contact assignment of the RJ45 plugs

Note:

Details for connecting to PROFINET are provided in Appendix IV of the training document, or in the product information "Installation Instructions SIMATIC NET Industrial Ethernet FastConnect RJ45 Plug".

	Preface	Notes	Startup with PROFIBUS	Startup with PROFINET	Program Example
T I A Training Document			Page 37 of 147		Module
			H01
Issued: 02/2008			Frequency Converter SINAMICS G120 on PROFIBUS DP and PROFINET