Siemens G120 manual Frequency Converter At Simatic S7, Learning Objective, Prerequisites

Automation and Drives - SCE

1.PREFACE

In terms of its contents, Module H01 is part of the teaching unit entitled ’Frequency Converter at SIMATIC S7’.

Programming

Languages

2 to 3 days Modules C

Fundamentals of

STEP 7 Programming

2 to 3 days Modules A

Additional Functions of STEP 7

Programming

2 to 3 days Modules B

Industrial Fieldbus

Systems

2 to 3 days Modules D

Plant Simulation with

SIMIT SCE

1 to 2 days Modules G

Process

Visualization

2 to 3 days Modules F

Frequency Converter

at SIMATIC S7

2 to 3 days Modules H

IT Communication with SIMATIC S7

2 to 3 days Modules E

Learning Objective:

In Module H01, the reader learns how the frequency converter SINAMICS G120 is started up together with the CPU 315F-2 PN/DP on PROFIBUS DP as well on PROFINET. Module H01 shows the method in principle, using a brief example for each the PROFIBUS and the PROFINET.

Prerequisites:

To successfully work through Module H01, the following knowledge is assumed:

•Knowledge in handling Windows

•Fundamentals of PLC programming with STEP 7 (for example, Module A3 - 'Startup’ PLC Programming with STEP 7)

•Fundamentals of PROFIBUS DP (for example, Appendix IV – Fundamentals of Fieldbus

Systems with SIMATIC S7-300)

●Fundamentals of network engineering (for example, Appendix V - Basics of Network Engineering)

	Preface	Notes	Startup with PROFIBUS	Startup with PROFINET	Program Example
T I A Training Document			Page 6 of 147		Module
			H01
Issued: 02/2008			Frequency Converter SINAMICS G120 on PROFIBUS DP and PROFINET