Automation and Drives - SCE
25.Then, the MAC address of the CPU on the Ethernet is selected. If you are connected to only one CPU, just accept with ’OK’. (→ OK)
Note: If several IO controllers are on the network, the device can be identified by means of the imprinted MAC address.
26.Now, assign the correct IP address to the IO controller if it has not been set correctly yet. In the dialog box that follows, confirm this with ’Yes’ and then start the CPU. (→ Ja → Ja)
The selected station does not have an IP address. Do you want to assign the address 192.168.0.1 now?
The module CPU
|
|
|
|
|
|
| Preface | Notes | Startup with PROFIBUS | Startup with PROFINET | Program Example |
|
|
|
|
|
|
T I A Training Document |
| Page 121 of 147 |
| Module | |
|
|
| H01 |
|
|
Issued: 02/2008 |
| Frequency Converter SINAMICS G120 on PROFIBUS DP and PROFINET | |||
