Automation and Drives - SCE
3.5.3Startup with the Micro Memory Card (MMC)
3.5.3.1Manual Parameter Upload from the Converter to the MMC
Preconditions
To upload a parameter set, the following conditions have to be met:
●A converter with a suitable parameter set is available
●A MMC of the type
●The supply voltage is applied to the upload converter
●The upload converter is in the "Operational" mode
●The parameters were copied from the RAM to the EEPROM
How it is done:
| Preface | Notes | Startup with PROFIBUS | Startup with PROFINET | Program Example |
|
|
|
|
|
|
T I A Training Document |
| Page 72 of 147 |
| Module | |
|
|
| H01 |
|
|
Issued: 02/2008 |
| Frequency Converter SINAMICS G120 on PROFIBUS DP and PROFINET | |||
