Automation and Drives - SCE
3.4Connecting the Frequency Converter SINAMICS G120
3.4.1Connecting the Power Module
The power modules are available in the following variants:
●Power Module PM240 with DC braking functions, supply voltage 3 AC 400V
●Power Module PM250 with inverter operation, supply voltage 3 AC 400V
●Power Module PM260 with inverter operation, supply voltage 3 AC 690V Control units and power modules can be combined in any configuration.
Configuration and connection of the different variants corresponds to the block diagram below.
SchmelzsicherungFuse
Schütz
C t t
Brake
RelaiselayanschlussConnection
Note:
Details for connecting the power module are provided in the installation manual for the power modules.
| Preface | Notes | Startup with PROFIBUS | Startup with PROFINET | Program Example |
|
|
|
|
|
|
T I A Training Document |
| Page 32 of 147 |
| Module | |
|
|
| H01 |
|
|
Issued: 02/2008 |
| Frequency Converter SINAMICS G120 on PROFIBUS DP and PROFINET | |||
