Control Panel Menus
System Setup Menu
Use this menu to configure the printer’s general operation settings. For example, time to power saver mode, alarm settings, etc.
Item | Description | |
|
| |
PowerSaver Time | Specifies the length of time, from 5 to 60 minutes, that the printer is idle | |
| before going into Power Saver mode. For details on setting the Power Saver | |
| Time, see Setting the Power Saver Time on page 24. | |
|
| |
Audio Tones | Specifies whether an alarm sounds when one of the following printer errors | |
| or actions occurs. These are set to Off by default. The volume cannot be | |
| adjusted. | |
| • | Control Panel |
| • | Invalid Key |
| • | Machine Ready |
| • | Job Complete |
| • | Fault Tone |
| • | Alert Tone |
| • | Out of Paper |
| • | Low Toner Alert |
| • | Base Tone |
|
| |
Fault | Specifies the amount of time that passes before the printer automatically | |
| deletes a print job when a there has been a job error. | |
| Set the default | |
|
| |
Automatically cancels a print job when it goes beyond a specified period of | ||
| time. Set the duration allowed for the print time. When the time expires, | |
| the print job is canceled. Duration can be set for up to 30 minutes in one- | |
| minute increments. | |
|
| |
Language | Specifies the language used in the control panel menus and in printed | |
| Information pages. | |
|
|
|
Phaser 6140 Color Laser Printer | 101 |
User Guide |
|