Control Panel Menus
Item | Description | |
|
| |
Auto Log Print | Specifies whether to automatically print a Job History Report after 22 print | |
| jobs. | |
| • Off (default): Prevents the Job History Report from printing | |
|
| automatically even if the number of print jobs exceeds 22. |
| • On: Automatically prints a report when the number of print jobs reaches | |
|
| 22. |
|
| Notes: |
|
| • You cannot set this during printing. |
|
| • After changing this setting, turn off the printer and then turn |
|
| it on again to activate the change. |
|
| |
Print ID | Prints the user ID in the specified place on the printed page. | |
| • Off (default): The user ID is not printed. | |
| • Top Left: Prints the user ID on the top left of the page. | |
| • Top Right: Prints the user ID on the top right of the page. | |
| • Bottom Left: Prints the user ID on the bottom left of the page. | |
| • Bottom Right: Prints the user ID on the bottom right of the page. | |
|
| |
Print Text | Specifies whether the printer outputs unsupported PDL data as text when | |
| the printer receives it. Text data is printed on A4- or | |
|
| |
RAM Disk | This feature is available when the printer’s memory is expanded from 256 | |
| MB to at least 512 MB RAM. | |
| Allocates memory to the RAM Disk file system for the Secure Print, Collating | |
| Jobs, and Proof Print, Form Overlay, and Font Download features. | |
| • | Enable |
| • | Disable (default) |
|
| |
Size Mismatch | Specifies how the printer reacts when it detects a difference between the | |
| size of paper specified at the control panel and the size loaded in the | |
| specified destination tray. Or, in the case where the paper in the specified | |
| tray runs out, the printer will select the substitute tray based on the Size | |
| Mismatch settings. | |
| When a Paper Type other than None is selected in the printer driver, it | |
| overwrites the Size Mismatch setting on the control panel. | |
| • Off (default): The printer will prompt you to select a tray for printing. | |
| • Larger Size: The printer will use a tray that has paper larger than the | |
|
| size specified for the print job but will print the page at 100% |
|
| magnification. |
| • Nearest Size: The printer will use a tray that has paper nearest to the | |
|
| size specified in the print job. The page will print at 100% |
|
| magnification. |
|
| |
mm/inch | Specifies the units of measurement to use for the custom paper sizes: | |
| • | Millimeters (mm) |
| • | Inches |
|
| |
Default Size | Specifies the default paper size as either A4 or Letter. | |
|
|
|
102Phaser 6140 Color Laser Printer User Guide