Xerox 6140 manual Commands That Can be Used in Email Text, Command Parameter Description

Maintenance

13.Click the Save Changes button.

14.In the navigation pane on the left side of the page, click Port Enabling and then select the check boxes for the ports to enable. Be sure to enable at least the Enable Mail Alerts port.

15.Click the Save Changes button.

Commands That Can be Used in Email Text

Notes:

•You can specify any title for the email when checking the printer status or changing the printer settings.

•Use the commands described in the next section to create the text of the email.

Use each command according to the following rules.

•Prefix all commands with the pound sign (#), and specify the #Password command at the top of the email.

•Command lines without the pound sign (#) are ignored.

•Write one command on each line and separate each command and parameter with a space or a tab.

When the same command is written two or more times in one e-mail, the second and subsequent commands are ignored.

Command	Parameter	Description
#Password	Password	Use this command at the top of the
		email when a password for read only or
		full access is set. You can omit this
		command when the password is not set.
#NetworkInfo		Set this when you want to check
		information on the network settings list.
#Status		Set this when you want to check the
		printer status.
#SetMsgAddr	Recipient Email address	Use this command to specify the e-mail
		address to which e-mail reports are sent
		to. This command can only be used
		when the full access password is
		specified by the #Password command.
Example of Commands

•When the read-only password is “ronly” (for “read only”), and to check the printer status: #Password ronly

#Status

•When the full access password is “admin”, and to set the recipient e-mail address to “service@xerox.com”:

#Password admin

Phaser 6140 Color Laser Printer	119
User Guide