Installation and Setup

Choosing a Location for the Printer

1.Select a dust-free area with temperatures between 10°–32°C (50°–90°F), and relative humidity between 15–85%.

Note: Sudden temperature fluctuations can affect print quality. Rapid heating of a cold room can cause condensation inside the printer, directly interfering with image transfer.

2.Place the printer on a level, solid, non-vibrating surface with adequate strength for the weight of the printer. The printer should be horizontal with all four feet in solid contact with the surface. The printer weight, without the options or paper, is 18.4 kg (40.57 lb.). With the 250-sheet feeder, the duplex unit, and consumables, the weight is 23.8 kg (52.47 lb.).

3.Ensure your printer has the proper amount of clearance for all of its features, including any options you purchased. See the following measurements.

The recommended minimal spacing for the printer is:

Overhead Clearance:

200 mm (7.9 in.) above the printer for clearance when opening the front door Height Requirement:

Printer: 415 mm (16.3 in.)

With 250-sheet feeder: add 108 mm (4.25 in.)

Other Clearances:

100 mm (3.9 in.) behind the printer

600 mm (23.6 in.) in front of the printer

100 mm (3.9 in.) on the left side of the printer

250 mm (9.8 in.) on the right side of the printer

4.After positioning the printer, you are ready to connect it to the power source and computer or network. Go to the next section, Connecting the Printer on page 32.

Phaser 6140 Color Laser Printer

31

User Guide

 

Page 31
Image 31
Xerox 6140 manual Choosing a Location for the Printer, Overhead Clearance