Safety
Electrical Safety
General Guidelines
Warning: Do not push objects (including paper clips or staples) into slots or openings on the printer. Making contact with a voltage point or shorting out a part could result in fire or electrical shock.
Warning: Do not remove the covers or guards that are fastened with screws unless you are installing optional equipment and are specifically instructed to do so. Power should be OFF when performing these installations. Disconnect the power cord when removing covers and guards for installing optional equipment. Except for
Note: Leave the printer on for optimum performance; it does not pose a safety hazard. If, however, the printer will not be used over an extended period of time, it should be turned off and unplugged.
The following are hazards to your safety:
•The power cord is damaged or frayed.
•Liquid is spilled into the printer.
•The printer is exposed to water.
If any of these conditions occur, do the following:
1.Turn off the printer immediately.
2.Disconnect the power cord from the electrical outlet.
3.Call an authorized service representative.
Laser Safety
This printer complies with laser printer performance standards set by governmental, national, and international agencies and is certified as a Class 1 Laser Product. The printer does not emit hazardous light because the beam is totally enclosed during all modes of customer operation and maintenance.
Warning: Use of controls, adjustments, or performance of procedures other than those specified in this manual can result in hazardous radiation exposure.
Power Cord
•Use the power cord supplied with your printer.
•Plug the power cord directly into a
•Do not use a ground adapter plug to connect the printer to an electrical outlet that does not have a ground connection terminal.
•Only use an extension cord or power strip designed to handle the electrical current capacity of the printer.
10Phaser 6140 Color Laser Printer User Guide