Xerox CX manual Requirements

Creating a calibration table using the Inline Spectrophotometer 17

Creating a calibration table using the Inline Spectrophotometer

Requirements:

The media that you choose must be loaded as SEF, and the printer must be ready for printing.

1.Suspend the Process Queue.

2.Make sure that the Print Queue is released and that no jobs are running.

3.From the Tools menu, select Calibration.

4.Define the parameters as follows:

a.In the Paper Coating list, select either Coated or Uncoated for the paper type.

Note: You can only select the media that is loaded in the printer.

b.In the Weight list, select the weight of the paper stock.

c.In the Tray list, select the tray where the paper stock is loaded for the calibration.