Xerox CX manual Info Data, Output Density, Properties

Managing calibration tables 55

●Calibration tables created in the Calibration Wizard.

●None: This is a default option and cannot be edited. Jobs that have this option selected are processed and printed without using a calibration table.

●Normal (default table): This is a default table and cannot be edited. If a calibration table has not been created for the media type, Normal weight, and screening method that you are using, the Normal calibration table is used when you process and print your job.

Info Data

Output Density

Measured: The values that are measure from the printed target.

Target: The expected values of the output density.

Minimum Accepted: The minimum measured value of the output density that is accepted for correction.

Properties

The parameters that were selected when the calibration table was created.