Xerox CX manual Imposition Template Builder Tool, Imposition Template Builder overview

Imposition Template Builder Tool 79

8.Click the Preview button.

A schematic representation of the imposition layout appears.

Note: When you print your job, a space of 0.39 inches or 10 mm is automatically added between the two sets on the sheet.

9.Close the Preview window.

10.Click Submit.

Your job is processed and printed according to the imposition settings for two sets per sheet. You have used most of the sheet's space and saved on paper. You can also easily cut and staple the two brochures.

Imposition Template Builder Tool

Imposition Template Builder overview

The Imposition Template Builder enables you to save imposition layouts and reuse them for different jobs, without needing to define the same layout repeatedly. The Imposition Template Builder also allows you to create and save templates with special layouts that cannot be created on the Imposition tab alone.

After you save a template, you can apply it to a specific job.

All saved templates appear on the Imposition tab. After you select an imposition method, the related templates appear in the Template parameters, in the Layout list. For example, if you created a Step & Continue template, the template appears in the Layout list only when you select the Step & Continue imposition method.

Some templates appear under more than one imposition method.

Method selected on Imposition tab:

Step & Repeat

Step & Continue

Saddle Stitch

Perfect Bound

Template layout type in the layout list:

Step & Repeat, Cut & Stack

Step & Continue

Saddle Stitch, Perfect Bound

Saddle Stitch, Perfect Bound

Creating an imposition template