Xerox CX manual Photo touch-up tab in the Job Parameters window, See also

Photo touch-up tab in the Job Parameters window 115

Parameter

Option

Ink Saving

Print grays using black toner

Description

GCR: Conserves toner by replacing the gray component (CMY) of pixels with black toner.

Selecting Normal gives you a smoother image quality. Selecting High, gives you a less smooth image quality (adds black into flesh tones).

The gray component replacement also prevents the consequences of excessive toner buildup, such as flaking and cracking , or the "curling" effect that may occur when printing transparencies.

While the gray component of each color is replaced by black, there is no change in the color quality of the printed image.

Prints RGB gray text, images, and graphics with black toner only. This makes the blacks richer and darker.

You can select from the following:

●For text

●For text and graphics

●For text, graphics, and images

In addition, you can Apply only when R, G, B values are the same.

See also:

Printing a spot color variation on page 63

Photo touch-up tab in the Job Parameters window

Parameter

Exposure and color cast

Image noise

Shadows and highlights

Red-eye

JPEG artifacts

Option

Description

Corrects underexposure, overexposure, and minor color- cast problems in photos.

Reduces noise (such as granularity caused by high ISO settings) in a photo.

Brings out details in the dark and light areas of a photo.

Removes the red-eye effect in photos taken with a flash.

Removes JPEG artifacts often found in low-quality or highly compressed JPEG files, particularly in gradient and vignette areas and around the edges of objects.