Xerox CX manual Mapping jobs to calibration tables, See also

Mapping jobs to calibration tables 21

Notes:

●If at any stage the scanning has not been completed properly, click Reset and scan again.

●If an error occurs while you are scanning the chart, an alert message appears. Click OK and re-scan the charts.

6.To save the calibration table, do one of the following:

●Select As default name to automatically name the calibration table using the screening method, meda type, and date.

●Select Save as to type your own name.

Note: It is strongly recommended that you include the media type, weight, and screening method in the calibration table file name.

7.Click Finish.

Mapping jobs to calibration tables

When you create a calibration table, the calibration table is based on the media type, paper weight, and screening method that you selected during the calibration process. Any job that has the specific media type, paper weight, and screening method that you selected, will automatically be mapped or linked to this calibration table.

In the Job Parameters window, under Color > Calibration, the Linked option is selected by default.

When you send your job to print, because the calibration table is linked to the job, it is automatically used when the job is printed.

See also:

Mapping media using the Media and Color Manager tool on page 52