Xerox CX manual 106

106 Chapter 10—Job parameters

Parameter

Option

Marks

Margins

Gutter

Spine

Description

●None: Does not apply any marks on the imposition layout for the printed job.

●Crop marks: Prints the lines that indicate where the sheet should be cropped. The Both Sides check box prints crop marks on both sides of the page.

Notes:

❐You can scale only an image, or the entire sheet proportionally.

❐If you want to use crop marks incorporated in the DTP application, make sure that enough space is left around your page in the PostScript file so that the page prints with crop marks.

❐If your job already includes crop marks incorporated in the DTP application, you do not need to add crop marks here. If you do add crop marks, both sets of crop marks can be printed.

●Fold marks: Prints the lines that indicate where the sheet should be folded. This is only available with Saddle stitch or Perfect bound.

●Crop & fold marks: Prints the lines that indicate where the sheet should be folded. This is only available with Saddle stitch or Perfect bound.

The value entered adjusts the spaces between the outside edges of pages and the edges of the sheet on which they are printed.

Notes:

●Margin settings should suit finishing equipment and requirements.

●Confirm binding parameters with your binder when planning your sheet.

The value that you enter depends on the paper size and imposition method that you choose.

The gutter size is the space between pairs of pages (according to the trim size) on a sheet. When the pages are folded into a booklet, the gutter allows space for trimming.

The value that you enter depends on the paper size and imposition method that you choose. This is only available with Perfect bound.