Xerox CX manual Print with exceptions, Adding exceptions to your job

Simulating a job with your template 83

Note: The page number that was previously in the target location is not automatically moved to another location. To retain this page, manually move this page to a new location.

If you have a duplex job and the Apply changes to front and back check box is selected, the page number for the back side of the page also changes. Using the example above, page 6 would be on the back side of page 5.

Simulating a job with your template

You can simulate how jobs from the Storage window will look if you apply an imposition template to them.

Note: The imposition template parameters are not actually applied to the job —you are viewing only a simulation of how the job would look if this template were selected on the Imposition tab.

1.In the Imposition Template Builder window, click the Simulate button.

2.Click Browse.

3.Select a job, and then click Select.

The parameters of the job (Sheet Size, Trim Size, Trim

Orientation, Sets per sheet, Bleed Size, Rotate 90, Crop

Marks, and Fold Marks) appear with their values in the

Simulate Imposition window.

Note: Both RTP and non-RTP jobs are available for simulation.

4.Change the parameters as desired.

5.Click View Simulated Job.

The Preview window appears. A simulation of the job is displayed with the current imposition template applied.

Print with exceptions

Adding exceptions to your job

Exceptions are used when you want to use different media types for special exceptions within a job, or add inserts.

Note:

1.Open the Job Parameters window of your job.

2.Click Exceptions.