![](/images/new-backgrounds/1172664/172664247x1.webp)
116 | Chapter |
Finishing tab in the Job Parameters window
Apply these settings to specify how to finish your job.
Parameter
Finishing
Print Order
Option
Module
Collated
Face up
Face down
Description
Includes the following options:
●OCT (Offset catch tray): The Offset checkbox is selected by default. If you don’t want to use an offset between sets, clear this check box.
Note: If the page size is larger than A3 (standard or custom), the Offset check box is unavailable.
●EHCS (enhanced high capacity stacker):
❐Select the relevant tray type (Top Tray or Stack Tray).
❐If you have a chained EHCS, select the desired tray from the
❐If you selected Stack Tray, select the Offset check box for the following types of jobs:
❐Collated to offset each copy from the next copy
❐Uncollated to insert an offset sheet when a new page number is delivered (when you are printing more than one copy of each page).
●HCSS (high capacity stacker stapler):
❐Select the relevant tray type (Top Tray or Stack Tray).
❐If you selected the Stack Tray, select one of the following options:
❐Offset to use an offset
❐Stapler to select stapling. If you selected Stapler, select the desired staple location (Front, Rear, or Dual).
●DFA (document finishing architecture):
❐Select the desired Profile from the list, according to the profile set in the printer you are using.
❐Select the desired Function, according to the profile set in the printer you are using.
Prints a complete copy of the job before the first page of the next copy is printed.
Delivers the job face up
Delivers the job face down