Xerox CX manual Managing color and profiles

Managing color and profiles 49

4.Define the parameters as follows:

a.In the Warm up Print box, it is recommended that you type 10, which is the default value.

Warm-up print settings defines the number of copies of a file that is printed before the standard ECI chart is printed and measured by the inline spectrophotometer on the press.

Because the performance of the press is best after several pages have been printed, it is recommended that you print at least 10 copies of the warm-up file.

b.In the Paper Coating list, select either Coated or Uncoated for the paper type.

Note: You can only select the media that is loaded in the printer.

c.In the Weight list, select the weight of the paper stock.

d.In the Tray list, select the tray where the paper stock is loaded for the calibration.

e.In the Screening area, select the screening method for which you want to create a calibration table.

Note: You can select all screening methods. The server creates a calibration table for each screening method that you select.

f.In the Profile Name box, the Profiling Tool automatically names the profile according to the paper stock name. To change the default name, you can type a new name. The