Xerox CX manual Cmyk RGB

114 Chapter 10—Job parameters

Parameter

Protected Colors

Calibration

Option

Original file values

Destination Profile

CMYK

RGB

Device Gray

Linked

Normal

None

Description

Uses the CMYK values from the file.

Uses the destination profile selected under Color > Color Flow, and applies it to the equivalent spot CMYK values.

Note: If you protect RGB, gray or CMYK colors, all colors with that specific combination found in the job will be protected. For example, a specific color combination used in a logo may align with a color used in an image in the job. The spot transformation affects the image color as well as that of the logo, sometimes to undesired results.

The following options are available:

●Preserve pure CMY colors: Preserves pure cyan, magenta, and yellow during transformation.

●Preserve black color: Preserves pure black during transformation.

●Use protected CMYK values: Retains CMYK colors as defined.

Use protected RGB values: Retains RGB colors as defined.

Use protect gray values: Retains gray colors as defined.

Uses the calibration table that was created for the media type, paper weight, and screening method selected for your job.

This is a default table and cannot be edited. If a calibration table has not been created for the media type, weight, and screening method that you are using, the Normal calibration table is used when you process and print your job.

This is a default option and cannot be edited. Jobs that have this option selected are processed and printed without using a calibration table.